Year of construction 1979
Impact energy 63 kJ
Weight of the approx. 1650 kg
Fixing for die holder:
Feuerbacher tensioning key 60.500 SB
Externally mounted cup springs
Fully supporting vertical contact face
Supporting clamping screw
Thread M27
Angels 5º/15º
Fixing for die inserts:
Feuerbacher tensioning key 55.500 SB
Thread M22
Angles 0º/15º
| Insert holder for forging with one piece die insert (max. size 340 x 500 mm). The parts of the holder are clamped by means of two Feuerbacher tensioning keys. Both keys are provided with a block insert to prevent longitudinal displacement. The inserts are fixed by means of two Feuerbacher tensioning keys. When exchanging the die only the die inserts need to be replaced. The base holders remain in the hammer. The offset in the die can be adjusted by using thin metal shims. |
As an alternative to the use of a second key, on one side
the holders of modified design can be located directly against the recess on one side of the tup and anvil.
This resists any forces that would attempt to cause tilting.
The die insert can be designed to be accurately located in the die holder so that sliding blocks for adjustment in this area are not required.
0 Comments